Friction Materials - The Rowland Company

Twintec Materials

Brand Llama — Mon, 30 Jul 2018 18:49:21 +0000

Bremskerl Twintec technology consists of an elastic underlayer with a friction lining surface. This provides higher dynamic friction coefficients while reducing lining wear by as much as 80%. Twintec can be combined with almost any Bremskerl material.

The post Twintec Materials appeared first on The Rowland Company.

Drum Brake Linings

Brand Llama — Mon, 30 Jul 2018 18:48:39 +0000

Bremskerl drum brake linings are available in a variety of sizes and designs to fit your equipment. Bremskerl produces high quality, asbestos-free friction materials with reduced wear rates. Typical applications: Mobile cranes, overhead cranes, public transit, trains

The post Drum Brake Linings appeared first on The Rowland Company.

Disc Brake Linings

Brand Llama — Mon, 30 Jul 2018 18:47:52 +0000

Bremskerl disc brake linings are made of high quality materials which help evenly distribute energy across the entire disc surface. This helps reduce wear, increasing both linings and rotor life. Typical applications: Mobile cranes, overhead cranes, public transit, trains

The post Disc Brake Linings appeared first on The Rowland Company.

Clutchtex

Brand Llama — Mon, 30 Jul 2018 18:46:56 +0000

Tribco Clutchtex is a 100% Kevlar fiber composite material which offers a high wear resistance and low opposing surface wear. It has excellent shock resistance and very low thermal conductivity. Clutchtex contains no metal, abrasives, or asbestos. Dynamic dry coefficient of friction: 0.36 Dynamic […]

The post Clutchtex appeared first on The Rowland Company.

Braketex

Brand Llama — Mon, 30 Jul 2018 18:45:41 +0000

Tribco Braketex is a 100% Kevlar fiber composite material which offers a high wear resistance and low opposing surface wear. Braketex contains no metal, abrasives, or asbestos. It can be used in wet or dry applications. Dynamic dry coefficient of friction: 0.36 Dynamic wet […]

The post Braketex appeared first on The Rowland Company.

Sintered

Brand Llama — Mon, 30 Jul 2018 18:16:05 +0000

Scan-Pac sintered friction products are designed to operate in applications where high energy dynamic stopping produces extreme heat. Good thermal conductivity is achieved with high concentrations of metallic fibers. Custom shapes, sizes, and formulations are available to best suit your application. Coefficients of friction: […]

The post Sintered appeared first on The Rowland Company.

Flexible Woven

Brand Llama — Mon, 30 Jul 2018 18:14:03 +0000

Scan-Pac’s woven friction materials are flexible and available in a variety of widths and thicknesses. These non-asbestos materials offer a consistent high friction level and good wear rate. Green Gripper Woven (GGW) is a versatile material for heavy-duty industrial applications. Gemini Woven is a […]

The post Flexible Woven appeared first on The Rowland Company.

Flexible Molded

Brand Llama — Mon, 30 Jul 2018 18:10:27 +0000

Scan-Pac 230AF and 232AF flexible molded sheeter linings are recommended for light to medium duty clutch and brake applications. Green Gripper Aramid (GGA) has a high aramid content, which allows it to be used for demanding tensioning applications. It contains no metal, giving it […]

The post Flexible Molded appeared first on The Rowland Company.

Rigid Molded

Brand Llama — Mon, 30 Jul 2018 18:09:09 +0000

Scan-Pac offers a wide variety of rigid molded friction materials. Scan-Pac offers flat sheets, molded brake blocks, and custom molded parts. Between the RF and Gemini series, the Rowland Company can help identify a rigid molded material to fit your needs. All Scan-Pac materials […]

The post Rigid Molded appeared first on The Rowland Company.