Disc Clutches and Brakes - The Rowland Company

CH Series Clutches and Brakes

Brand Llama — Mon, 30 Jul 2018 19:16:20 +0000

Logan CH clutches and brakes can be air or hydraulically actuated and can be used for either wet or dry operation. Pressurizing the actuating cylinder causes the clutch’s discs to clamp. Torque is then transferred from the disc pack to the splined drive ring. […]

The post CH Series Clutches and Brakes appeared first on The Rowland Company.

CU/CX Disc Brakes

Brand Llama — Mon, 30 Jul 2018 19:15:29 +0000

Johnson CU and CX Series DC magnetic disc brakes are dust and drip protected, and the terminal box uses an IP55 enclosure. They are used for service duty (CU) or emergency stop duty (CX). Braking force: 809 to 50,600 lb (3.6 to 225 kN) […]

The post CU/CX Disc Brakes appeared first on The Rowland Company.

HC Clutch

Brand Llama — Mon, 30 Jul 2018 18:28:07 +0000

Wichita HC clutches are an oil-immersed clutch designed for end-shaft or through shaft mounting configuration. The compact size of the HC makes these units ideal for incorporation within a gear housing. All torque transmitting members are designed to provide for continuous heavy duty industrial […]

The post HC Clutch appeared first on The Rowland Company.

CBH Clutch/Brake Combination

Brand Llama — Mon, 30 Jul 2018 18:27:37 +0000

Industrial Clutch CBH combination clutch-bakes are oil immersed units with a spring-set brake and hydraulically-set clutch. They are designed for extremely high cyclic rates for those applications that require a high degree of stopping accuracy. Torque range – 30,000 to 90,000 lb-in (Clutch), 10,000 […]

The post CBH Clutch/Brake Combination appeared first on The Rowland Company.

LKB Brakes

Brand Llama — Mon, 30 Jul 2018 18:27:13 +0000

Industrial Clutch LKB brakes are a spring-set, air or hydraulic released brake. This design offers a wide range of torque capacities and release pressures, with total attention given to maximizing ventilation for dissipating large thermal loads. The benefits include longer lining life, stable friction […]

The post LKB Brakes appeared first on The Rowland Company.

Disc-O-Torque Clutch

Brand Llama — Mon, 30 Jul 2018 17:56:08 +0000

The TB Wood’s Disc-O-Torque friction disc clutches can operate wet or dry, and with hydraulic or pneumatic actuation. The have high torque density, long life, and are self-contained. Torque range: 50 to 1,776 lb-ft (67 to 2,407 Nm) Typical applications: Machine tools, conveyors, pumps

The post Disc-O-Torque Clutch appeared first on The Rowland Company.

Spring Set Brakes

Brand Llama — Mon, 30 Jul 2018 17:28:57 +0000

Wichita Clutch Spring Set Brakes (SSB) are ideal for safe protection of process equipment. The units are similar to the Low Inertia units and designed to be free from effects of centrifugal force and self-energization. Low inertia start/stop parts reduce acceleration times which allows […]

The post Spring Set Brakes appeared first on The Rowland Company.

High Torque Clutches

Brand Llama — Mon, 30 Jul 2018 17:25:38 +0000

Wichita High Torque Clutches (HTC) are designed for end-shaft mounting onto a bearing supported flywheel or gear wheel. They provide the highest torque to size ratio of any Wichita clutches. Torque range – 800 to 7,080,000 lb-in (90 to 799,910 Nm) Typical applications – […]

The post High Torque Clutches appeared first on The Rowland Company.

CCB – Clutch/Brake Combination

Brand Llama — Mon, 30 Jul 2018 17:19:21 +0000

Wichita Clutch/Brake Combination (CCB) units provide fast, smooth cycling for stamping presses and metal forming equipment by combining a high performance clutch and spring set brake in a compact assembly. A single air tube actuates both the single plate clutch and the single plate […]

The post CCB – Clutch/Brake Combination appeared first on The Rowland Company.

Standard Vent Clutch

Brand Llama — Mon, 30 Jul 2018 17:11:03 +0000

Wichita Clutch Standard Vent clutches are designed for reliable in-line power transmission. The simple air-tube design, with small air volume, speeds engagement and disengagement. It is ideally suited for large inertia loads where smooth controlled starts are needed. Torque range – 7,000 to 30,955,750 […]

The post Standard Vent Clutch appeared first on The Rowland Company.